Apexior – Coatings For Resistance To Boiling Water/Steam And Waterside Corrosion – Dampney Company
| Application | Industrial Use |
| Brand | Apexior – Dampney Company Inc USA |
Enquiry about Apexior - Coatings For Resistance To Boiling Water/Steam And Waterside Corrosion - Dampney Company
Description
Apexior 1One component, boiling water / steam immersion coating to 700F (371C)
Apexior Number 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1 is resistant to continuous immersion in boiling water and steam from 200°F (93°C) to 700°F (371°C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1 prevents pitting corrosion and stops corrosion that has already begun – except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1 will also see an increase in heat transfer efficiency.
Apexior 1COne component, boiling water / steam immersion coating to 700F (371C)
Apexior Number 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1 is resistant to continuous immersion in boiling water and steam from 200°F (93°C) to 700°F (371°C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1 prevents pitting corrosion and stops corrosion that has already begun – except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1 will also see an increase in heat transfer efficiency. Apexior Number 1 performs ideally with water treatment in steam generating equipment.
Apexior 3One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)
Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments. Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun – except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup.
Apexior 3CVOC – One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)
Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments.Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun – except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup. Apexior Number 3 performs ideally with water treatment.
Features• Air dries, easy to apply• Excellent wettability properties• Resistant to fresh/salt water• Easily re-coatable• Surface tolerant features• Inert to water treatment• Prevents scale buildup
Common Uses• Chillers• Cold water storage tanks• Condenser heads and shells• Inside shell of AC units• Pump casings on fresh/salt water intakes• Inner housings of pumps• Sump pump pits and chain lockers• Bilge and forepeak tanks
Apexior Number 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1 is resistant to continuous immersion in boiling water and steam from 200°F (93°C) to 700°F (371°C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1 prevents pitting corrosion and stops corrosion that has already begun – except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1 will also see an increase in heat transfer efficiency.
Apexior 1COne component, boiling water / steam immersion coating to 700F (371C)
Apexior Number 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1 is resistant to continuous immersion in boiling water and steam from 200°F (93°C) to 700°F (371°C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1 prevents pitting corrosion and stops corrosion that has already begun – except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1 will also see an increase in heat transfer efficiency. Apexior Number 1 performs ideally with water treatment in steam generating equipment.
Apexior 3One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)
Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments. Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun – except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup.
Apexior 3CVOC – One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)
Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments.Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun – except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup. Apexior Number 3 performs ideally with water treatment.
Features• Air dries, easy to apply• Excellent wettability properties• Resistant to fresh/salt water• Easily re-coatable• Surface tolerant features• Inert to water treatment• Prevents scale buildup
Common Uses• Chillers• Cold water storage tanks• Condenser heads and shells• Inside shell of AC units• Pump casings on fresh/salt water intakes• Inner housings of pumps• Sump pump pits and chain lockers• Bilge and forepeak tanks
Additional Information:
- Item Code: Apexior
- Delivery Time: 3-4 weeks
Y
